Recent content by granlobo12

I have a TM2, I was asking if the footblasters going through the tm2 would work with the amp, sorry for the lack of clarification.

https://simmonsdrums.net/dp/da200s/ I found a used version of this Simmons Amp online. It has 2 individual input on it, so would it be possible to run my individual footblasters into each input? Again thank you all for your input

That might be what I’m looking for, are they the kind used for ekits? Thank you!

Thank you! Do you have any idea of any specs a speaker/pair of speakers would need to handle the triggers?

Noise is not an issue. Its a relatively medium sized basement, and I have adequate hearing protection, I just need the other people I play with to be able to hear my kick triggers.

Thank you for your response. Would a Focusrite Scarlet 18i20 be able to be used as a mixer? And what kind of budget speaker/pa could be used for casual playing with others using medium 50-100 watt guitar amps? Any further input you can provide is greatly appreciated!

Hello all! I’m a metal drummer and just getting my first pair of triggers, specifically footblasters. I have the equipment I need to record them into my DAW, but I am unaware of the type of amp I would need to play with them casually/in a live situation. I have heard that some amps cannot handle...

Hello all! I recently put a new reso head on a 5.5x14 Pearl Masters Maple Complete snare, and plan on replacing the batter as well. Currently it has a Remo emperor coated vintage as the batter, and a Evans hazy 500 as the reso. I’m aiming for lots of attack and note separation when playing blast...

The footboards don’t hit the bottom and I removed the cobra coils. I have tried to use the independent beater angle footboard angle adjustments but they seem to move eachother whenever I attempt to adjust them individually.

Thank you so much for the instructions, I’m looking forward to getting my new bearings in.

Thank you so much, I should have mentioned that they are the newer generation of Iron Cobra.

Hello all! Around 6 months ago I got a pair of Iron Cobra 900 powerglides, and within the last month or so they have started to feel like they’re losing responsiveness regardless of spring tension/other settings. I just replaced the springs with the heavier gauge ones that Tama sells and it has...

Thank you all for the advice, I really appreciate it.

Should I only drill the main crack? There is a smaller 2nd one forming also in the picture

Hello all! I have a Zildjian A 18 rock crash with a crack forming along a lathe line, picture below. Currently I cannot afford a new one, so any advice regarding fixing/preserving it would be greatly appreciated. Preserving this cymbal is my top priority over sound quality.Thank you for your...